Ultra Clean Hldgs (NASDAQ:UCTT) held its first-quarter earnings conference call on Tuesday. Below is the complete transcript from the call.

This content is powered by Benzinga APIs. For comprehensive financial data and transcripts, visit https://www.benzinga.com/apis/.

View the webcast at https://app.webinar.net/kl92PVbPXqn

Summary

Ultra Clean Holdings Inc reported Q1 2026 revenue of $533.7 million, surpassing the midpoint of guidance, driven by strong execution across products and services.

The company is benefiting from increased investment in AI-driven computing, with significant growth expected in semiconductor demand, particularly in leading-edge foundry logic and high-bandwidth memory.

Gross margin improved to 16.5% due to better product mix and higher volumes, and the company anticipates further margin improvement as the year progresses.

Future revenue potential is approximately $4 billion, with a focus on scaling operations and leveraging AI-compatible solutions for enhanced efficiency.

The company issued $600 million in convertible notes and refinanced its credit facility, reducing its average borrowing rate significantly.

Q2 2026 revenue guidance is set between $565 million and $605 million, with EPS projected to be between $0.44 and $0.60.

CEO James Zhao highlighted the execution of the UCT 3.0 strategy, focusing on ramp readiness, new product introduction, and digital transformation to capitalize on AI-driven growth.

CFO Sherry Savage announced her retirement after 17 years with the company, expressing confidence in the company's future growth and success.

Full Transcript

OPERATOR

Good afternoon ladies and gentlemen and welcome to the UCTReport's first quarter 2026 financial results conference call. At this time all lines are in listen only mode. Following the presentation, we will conduct a question and answer session. If at any time during this call require immediate assistance, please press star zero for the operator. This call is being recorded on Tuesday, April 28th of 2026. I would now like to turn the conference over to Rhonda Bineto, Investor Relations. Please go ahead.

Rhonda Bineto (Investor Relations)

Thank you operator. Good afternoon everyone and thank you for joining us. With me today are James Zhao, CEO Sherry Savage, CFO and Cheryl Knesser, VP Marketing. James will begin with some prepared remarks about the industry and highlight some of the opportunities ahead for UCT. Sherry will follow with the Financial Review and then we'll open up the call for questions. Today's call contains forward looking statements that are subject to risks and uncertainties. For more information, please refer to the Risk Factors section in our SEC filings. All forward looking statements are based on estimates, projections and assumptions as of today and we assume no obligation to update them. After this call, discussion of our financial results will be presented on a non-GAAP basis. A reconciliation of GAAP to non-GAAP can be found in today's press release posted on our website. Also beginning this quarter, our non-GAAP results now exclude the impact of unrealized gains and losses on foreign exchange and our revised reference to prior periods was included in our fourth quarter earnings press release back in February and with that I'd like to turn the call over to James. James, please go ahead.

James Zhao (Chief Executive Officer)

Thank you Rhonda and good afternoon everyone. We appreciate you joining us for the Q1 2026 earnings call. In my prepared remarks I will provide my thoughts on the near and the longer term market drivers and highlight where UCT has a clear competitive advantage to capitalize on a variety of opportunities to during this multi year up cycle. Following that, Sherry will provide a financial update and then we will open up the call for questions. We started the year out strong and delivered revenue and earnings above the midpoint of our guided range for the first quarter driven by solid execution across a broad set of prodUCTs, services and customers. As you can see in our Q2 guidance, we're seeing momentum built across the semicondUCTor landscape supported by growing industry wide investments in AI driven computing. I'd like to acknowledge our global teams for the sense of urgency, focus and operational excellence they continue to demonstrate every day. Their commitment to our customers and to driving the continuous improvement is elevating our performance today and positioning UCT to compete and win in the next phase of AI driven growth. The rapid expansion of AI infrastrUCTure is fueling increased investment across the semicondUCTor ecosystem with hyperscalers and cloud providers expect to deploy significant data center capacity by spending around 600 billion in 2026, driving demand sharply higher investment by memory companies to address the bottleneck will remove a major constraint for the overall server supply chain, increasing foundry unit demand to support its growth. AI data center growth is being fueled by the rapid adoption of generative and agent AI and we're now seeing the early impact of physical AI as well. This new wave is driving increased demand for for AI memory and the leading edge foundry logic, further accelerating fab capacity investments. These investments are driving the surge in WFE spending with notably strong demand in leading edge foundry logic, high bandwidth memory and advanced packaging, all critical enablers of AI workloads. Increasing device complexity is driving higher process and equipment intensity, especially in deposition and removal. Sustaining the WFE cycle and expanding UCT's opportunity demand continue to build week by week and we expect this momentum to increase as customers gain clarity on fab timelines, delivery schedules and ramp readiness. Long term customer forecast and capacity requests reinforce our confidence in continued WFE demand growth. With our services business directly tied to waferstars, we are also seeing increasing wafer volumes across IDMs and foundries driven by AI demand and ongoing fab expansions. With higher tool utilization creating a durable multi year growth tailwind for our service business, we're aligned with our customers and industry sediment that were in the early stage of a multi year cycle that should accelerate into the second half of this year and beyond. Strong demand is occurring alongside emerging supply side constraints including clean room capacity and the time required to bring new fabs online. As a result, today's environment is driven not only by demand but also by the industry's ability to scale efficiently. By executing on our UCT 3.0 growth strategy, we are strategically positioning to win. In this environment, ramp readiness remains a top priority. Under UCT 3.0 we are executing with urgency and a customer first on site, align our teams, systems and supply chain to deliver with speed, quality and consistency. We see the AI driven ramp as a meaningful opportunity to drive growth and expand margins through improved utilization and more efficient operations and infrastrUCTure. In parallel, we're advancing our MPX strategy, new prodUCT introdUCTion, development and transition to accelerate time to market through our global centers of excellence. By co innovating earlier with customers, compressing NPI cycles and strengthening responsiveness and the supply chain resilience, we are enabling faster ramps to high volume prodUCTion near our customers. This positions us to execute at speed and scale, supporting incremental share gains as customers prioritize development velocity and ramp speed while driving UCT's operating leverage and margin expansion through higher volumes, improved mix and greater efficiency Supporting ramp readiness and NPX we're making strong progress on our third UCT 3.0 initiative, digital transformation. We are upgrading our systems, processes and data infrastructure with AI compatible solutions to improve visibility, reduce cycle times and increase productivity while enabling faster customer response. These efforts are strengthening our foundation for AI enabled operations, increasing agility, driving productivity gains and transforming UCT into a more scalable enterprise aligned to capture growth in this multi year AI driven industry upturn Our global Footprint supports around $3 billion in revenue today and can scale up to $4 billion with modest incremental capital investment. Assuming continued progress in workforce development, strategic supply chain and operational scaling, we do not expect infrastructure capacity to be our constraint as volumes ramp. This should allow UCT to drive stronger operating leverage, improve profitability and create sustainable value. In closing, while the long term outlook remains strong, the near term environment remains dynamic with variability across customer spending, potential supply chain constraint and geopolitics. In this environment, disciplined execution will define the winners. With our trusted partnership with key customers, strong ramp readiness and a global footprint that enables speed, agility and scale, we believe we are well positioned to capture an outsized portion of the opportunities ahead of us. I will now turn the call over to Sherry who will summarize our first quarter result and update you with our second quarter guidance. I look forward to your questions following the financial summary. Thank you.

Sherry Savage (Chief Financial Officer)

Thanks James and good afternoon everyone. Thanks for joining us. In today's discussion I will be referring to non-GAAP numbers only. As James mentioned, we are seeing increased momentum from the early stages of a multi year AI driven expansion and we're executing with urgency to support customer ramps while maintaining a strong focus on operational efficiency, cost discipline and margin improvement. For the first quarter of 2026, total revenue came in at $533.7 million compared to 506.6 million in the prior quarter. Revenue from products was $465.7 million compared to 442.4 million last quarter. Services revenue was 68 million in Q1 compared to 64.2 million in fourth quarter. Our global footprint supports about 3 billion in revenue today and can scale to approximately 4 billion with modest incremental capital investment. With ongoing progress in workforce and operational scaling, we do not expect capacity constraints as production increases over time, we would expect to benefit from improved operating leverage and corresponding margin expansion. Total gross margin for the first quarter was 16.5% compared to 16.1% last quarter. Product gross margin was 14.6% compared to 14.1% in fourth quarter and services was 30% compared to 29.7% last quarter. Gross margin improved primarily due to better product mix and higher volumes driving factory efficiencies. Margins continue to be influenced by fluctuations in volume mix and manufacturing region as well as material and transportation costs, so there will be variances. Quarter to quarter operating expense for the quarter was $61.1 million compared to $56.6 million in fourth quarter. As a percentage of revenue, operating expenses were 11.4% versus 11.2% last quarter. Total operating margin for the quarter came in at 5.1% compared to 4.9% last quarter. Margin from our products divisions was 4.2% compared to 3.9% and services margin was 11.5% compared to 12.4% in the prior quarter. The first quarter tax rate came in at 20%. Consistent with our expectations, our mix of earnings between higher and lower tax jurisdictions can cause our rate to fluctuate throughout the year. For 2026, we expect our tax rate to stay in the low 20% range based on 46.3 million shares outstanding earnings per share for the quarter or $0.31 on net income of $14.5 million compared to $0.24 on net income of $10.9 million in the prior quarter. During the quarter, we made the strategic decision to further strengthen our balance sheet and meaningfully reduce our ongoing cost of capital. In February, we priced a $600 million offering of zero coupon convertible senior notes. We used a portion of the proceeds to fully repay our term loan B, reducing our annual cash interest expense by approximately $30 million. Subsequent to quarter end, we refinanced and upsized our revolving credit facility from $150 million to $250 million, reduced the interest margin by 75 basis points and extended the maturity to 2031, further enhancing our liquidity and financial flexibility. Together, these actions are expected to reduce our weighted average borrowing rate from around 6.2% to approximately 1.4%. Turning to the balance sheet, cash and cash equivalents were $323.5 million compared to 311.8 million at the end of last quarter. Operating cash flow was negative $33.3 million this quarter compared to positive 8.1 million last quarter, driven primarily by higher working capital as we build inventory to meet near term demand and support future growth. We are seeing broad based improvements across the semiconductor landscape heading into the second half of this year and beyond, underpinned by sustained industry investment in AI driven computing. We remain focused on maintaining discipline around margin expansion and driving sustainable shareholder returns over time. Turning to the guidance for the second quarter we project total revenue to be between $565 million and $605 million and earnings per share in the range of $0.44 to $0.60. And with that I'd like to turn the call over to the operator for questions. Thank you ladies and gentlemen. We will now begin the question and answer session. To join the question queue you may press star then 1. On your touchtone phone you will hear a tone acknowledging your request. If you're using a speakerphone, please pick up your handset before pressing any keys. To withdraw your question, please press Star then number two. Our first question comes from the line of Charles Shih from Needham. Your line is open.

James Zhao (Chief Executive Officer)

Hey, good afternoon James. Sherry, maybe the first question James, what's the WFE outlook you are seeing as of today? I think in your prepared remarks there's a line you mentioned, you talked about solving the memory bottleneck and the relation to how that increases foundry unit output and I'm not sure the context of that line. And are you kind of implying maybe the memory WFE growth is pretty high today? Maybe some of that strength will transition more to the leading edge foundry logic? I'm not sure what you meant by that line, but can you elaborate a little bit there while you address the WFI outlook question? Thank you. Thanks Charles. Yes, the WFE outlook is really continue to grow bigger than we saw the previous quarter. We see really from our customers they're quoting 140 to 145 billion in 2026. So that's depend on where you see the 25 number end up with it's 18 to 20% of year over year growth and we see the similar momentum the customer are talking about 15% and above for the 2027. So to your question about the memory growth, I think that we kind of see that the AI capacity is somehow gated by the memory capacity in the past three four quarters and now we see that all the major memory customers are investing in their greenfield factories and also upgrading their existing fabs maximize their current footprint. So that actually gave a whole industry a unlock of the constrained capacity. So we see more of the new leading age new factory launches in basically all three leading customers. Tsmc, Intel, And Samsung got it. So maybe the second question, James, understand that the outlook is getting stronger on a week by week basis. You gave a special shout out to edge deposition. And I think that's well understood. But is there any part of your end markets that may still be a little bit slow, maybe even on a relative basis? Didn't hear you talk about lithography. Didn't hear you talk about your domestic Chinese customers. What's going on there in those areas. Thanks. Yeah, I think that first of all very good question. If you see the really the really the fast growing segment in WFE overall is really the leading edge foundry logic and a HBM on the memory side and advanced packaging. So those are more a hatch and removal intensive in terms of capital intensity. So therefore relatively you hear our customer are saying that they see that the first half the deposition and the edge is at mid 30s of the WFE and the second half they see that increase to the high 30th of WFE. So naturally because this high growth area are edge and depth intensive, so we see a higher share of deposition and etch in overall WFE. The flattish area we see is probably the non tapped and edge segment overall. And surprisingly the trailing node foundry logic also not going down. They're more like flattish China. As we discussed before, it was a kind of building inventory stock situation in 24 and 25. Therefore they're really kind of become bigger portion of worldwide WFE at 35 to 40. Now we're seeing they're back to normal in the low 20s the portion of the worldwide WFPE. So I don't think that outlier, it's more back to the normal business situation. Got it. Maybe the last question from me, if I. If I may, if I understand the typical behavior of your customers correctly, I think this is a year, I mean this year is when they are competing for basically who can ship tools faster to their customers. How do you assess in this kind of situation whether the requests are coming from our customers are reasonable, whether or is it any chance some of the requests you would see unreasonable and potentially at expense of the growth for your outer years. How do you, how do you handle the situation like that and in terms of how you allocate your capacity, grow your capacity, etc. Just maybe a little bit of high level philosophical question from want to understand how you operate in environment like this. Thanks. You know, actually this is a great question. I think that I really see a very healthy move and as an industry, what I mean by that is that we see that customer actually giving us a long term forecast so we can do the planning better and the long term forecast actually showing the growth momentum. They gave us a confidence to really kind of utilize our current capacity and also have the confidence to plan for the next step expansion. As I mentioned in my previous earnings call and this one, we really have capacity to really run at $3 billion run rate per year. The current run rate is still 2 billion, 2.2 billion. So we have the Runway to really kind of address additional demand. And our brick-and-mortar capacity can handle up to $4 billion. So by minimal capital investment we can have six to nine months to build that capacity. So we can really reach the $4 billion run rate. So in that sense we're well positioned to address the drop in demand from our customers. Thanks for the color, James. Thanks.

OPERATOR

Our next question comes from the line of Krish Sankar from TD Cohen. Your line is open.

Robert Mertens

Hi, this is Robert Mertens on the line. On behalf of Krish, thanks for taking my questions. I guess the first one is just around your domestic China business. Do you have a percentage of sales figure you could share for the March quarter and just how you sort of expect that portion of your business to trend given that the current semi cap customers in China have been doing pretty well?

James Zhao (Chief Executive Officer)

Yeah. As we previously discussed, the percentage of our China business, domestic China business is less than 5% of our overall revenue. We maintain that kind of range and what we see is that gradually the domestic Chinese we customers will increase their share within the China WFE market. And we see also the growth opportunity as we grow the share with those Chinese customers.

OPERATOR

Our next question is from Christian Schwab from Craig Hallum Capital Group. Your line is open.

Christian Schwab

Great congrats on the great quarter and outlook. Given the demand is improving week by week, I guess it's kind of crystal clear. But do you know, as you look at the year, do you have an idea of what percentage of revenue will be second half weighted versus the first half? Yeah, great question. So you know, as you can see that in, in our forecast we're seeing close to double digit growth quarter over quarter from Q1 to Q2. We expect a similar range of growth going forward and for the second half. Perfect, thank you. And then can you give us a, you know, given you know, 4 billion in revenue driven by increased WFE. But finally seeing a very material increase in wafer starts to drive your services business. When you talk about 4 billion in revenue potential and another billion that could be added given a modest Amount of capital and notice to put that online, what would you anticipate would be your mix of revenue at 4 billion? That would be service? Yeah, I think that's good question. So as we discussed, we see that our service revenue is really a function of wafer start and a small portion of that business is also direct correlated to the WPE growth. So in aggregated base, we expect a double digit growth for the year on the service side. And going forward, we still see a range of 10 to 12% as our overall revenue percentage. Right. And then lastly, you know, historically if we go back to 2021, as far as the last accelerated WFE spending cycle, you know, uo grew WFE growth materially and should we assume the big, you know, not only market share gains and certainly your ability to potentially gain share with the ease of adding increased capacity. But as far as outgrowing wfe, there's a lag period between, you know, installing fab equipment and wafer starts being finished, which is the driver of the services business, I guess in aggregate. Is that the way we should be thinking about the primary driver of your growth outperforming wfe or do you think this cycle you're better positioned for market share gains? Yeah, so we definitely see that we will grow with the WFE growth and with really the upside potential on both product side and service side. And really to me the playbook is always defend the core which we are really in a leading position and grow the SEM. So we enter into new modules and new gas panel business as our customer expands their product portfolio and then finally win at inflection. So position ourselves with stronger MPI capabilities so we can align with customers, NPI roadmap and win in the next node inflection. Understood. Great, thank you. No other questions. Thank you.

OPERATOR

Our next question is from Edward Young from Oppenheimer. Your line is open.

Edward Young (Equity Analyst)

Hi James, Sherry team. Thanks for the time. Just first question related to that strong second quarter guide on the revenue side and for the remainder of the year, how should we think about gross margin progression?

Sherry Savage (Chief Financial Officer)

Yeah, gross margin should start to continue to improve as we move through the year. You know, obviously it will see it being slightly up in Q2 and then continue to grow as we move through the year as the revenue potentially goes up. So so obviously mix and where it's shipping from does play a factor in that and things change as we move through the year. But we truly do see it moving up as we get closer to the Q4 time frame.

Edward Young (Equity Analyst)

And Sherry, if I could dig a little Deeper related to mix. I mean you've got a plethora of different products and services. Just focusing on the product side, what are the gross margin differentials between your lowest and highest and what's you know, what's your highest margin products and maybe talk some detail around that.

Sherry Savage (Chief Financial Officer)

Yeah, we probably don't publish as much on the specific product margins. But you know, as I've mentioned before, we have a large bell curve of margins. So they can range anywhere between 10% to 50 to 60% depending upon whether it's a component part or it's a module or a gas panel. So it just really depends on the shell sheer volume of each of those mixes of products that play into our overall gross margin along with how fast the revenue comes in to us and how fast we can hire labor and other costs associated with that. So those are the key factors that play into our margin as we grow revenue. So again a large bell curve of margins. There's quite a few different products and different margins within those products as well. So that's why it makes it complicated to to detail all of those out.

Edward Young (Equity Analyst)

Got it. And maybe a question for James. You know, beyond the general uplift in WFE, you mentioned your UCT 3.0 strategy. I know it's a long term vision, but just interested in the progress around that the CO Innovator and the MPX framework and just wondering how customer receptivity has been to that and when can we expect to see specific market share gains or new module wins around that MPX framework.

James Zhao (Chief Executive Officer)

Great question. We are investing in our I call the regionalized center of excellence. So basically we have MPI center of excellence in us. We further enhance that and we're actually expanding our MPI capabilities in Asia and also in Europe. So the customer want to have the engineers co innovate, define the spec and really design the system and modules close to their core engineering team. That's actually in Europe, in US and expanding to Asia. So we follow customers need on that. Then we will also transfer that locally by region to our HVM site. Also distribute in all the regions, us, Europe and Southeast Asia. And that's really well aligned with our customer strategy where they also moving their global engineering footprint close to their high value production sites. So well received by customer. We see some early momentums and that's actually accelerating our MPI engagement with customer. We already have a pretty strong pipeline of MPI engagement with existing customers. This regionalized center of excellence just further enhance our capabilities.

Edward Young (Equity Analyst)

Okay, thank you.

OPERATOR

Our next question is from Karish Sankar from TD Cowan. Your line is open.

Karish Sankar (Equity Analyst)

Hi. Thank you. I realized I put myself on mute after my first prior question and my second question was going to be around the margin profile, but you just answered it, so I won't make you repeat yourself. Thank you again.

OPERATOR

I'd like to turn the call back over to Sherry Savage for an announcement.

Sherry Savage (Chief Financial Officer)

Thank you, operator. I have an announcement to make and I wanted to share it on this call because I personally know many of you here at Staff. After a lot of thought, I've decided to retire from UCT. Being part of UCT's journey over the past 17 years has been an incredible privilege. I'm incredibly proud of what we've built together, and I'm deeply grateful for the trust, partnership and support of our teams, our leadership and our board. I'm confident that UCT is ideally positioned for continued growth and success in the years ahead. I'll remain fully engaged until we find my successor looking both internally and externally, and I'll continue behind the scenes to ensure a smooth transition. Thank you for making this journey meaningful and rewarding for me. I really appreciate the support many of you have given to me over the years. And with that, thank you for joining our call today and we will look forward to seeing you when we report our second quarter earnings next.

Disclaimer: This transcript is provided for informational purposes only. While we strive for accuracy, there may be errors or omissions in this automated transcription. For official company statements and financial information, please refer to the company's SEC filings and official press releases. Corporate participants' and analysts' statements reflect their views as of the date of this call and are subject to change without notice.